DF-500 series anionic polymer flocculant

Application method

(1)The addition amount is generally applicable as follows:

Flocculating agents use: 0.1 to 0.3 PPM ?

Flocculant: 0.55ppm

?filter AIDS with: 0.05 to 0.3 PPM ?

The sludge conditioner with: no sludge ? 0.12% fruit

?(2) dissolve dilution and adding method:

Temperature is lower than 50 ℃ water, first half within the dilution tank injection quantity, start the blender when water vortex state formation, will advance ? tally up the flocculant to join, and surplus water supplement, stir until completely dissolved particle state. If use mechanical power (stirring, please use the high shear or mechanical rotary number higher than 350 RPM, lest make the flocculant interrupt molecules and reduce condensation effect ?). The concentration of diluent is usually 0.1%. ? will complete the diluent pumped to add the slot, can be continuously added in the pretreatment system. System injection points must be selected to be quickly and completely dispersed throughout the system in order to achieve excellent results.

Main use

Raw water treatment: drinking water, industrial water

Paper industry: pulp washing wastewater, white water recovery, filler retention, improve filter water

Urban wastewater: wastewater settlement, sludge dehydration concentration

Oil well engineering: three recovery of oil well

Industrial wastewater: mining, steel, electroplating, civil engineering, dredging, sand, oil, washing and dyeing, leather, food and other industries.

Chemical industry solid-liquid separation process: titanium dioxide, sucrose concentration, brine refining, ore washing

Product specification

Appearance: White granules /PH

(0.1% solution) : 6-8

Charge: medium negative

Packing

15kg/ bag